HOME > What's new
Background of Development
VESSEL Ball Grip Screwdrivers are long selling products supported by users from various industries for more than 30 years since its release in 1984. They were initially designed for electricians, featuring a flat slotted tip in view of terminal box work and a unique ball-shaped grip which is easilly stored in a waist tool bag and which enables more powerful tightening torque.
The NEW Ball Ratchet Screwdriver No.2200 incorporates ratchet mechanism which was not in the conventional ball grip screwdrivers, so that a user can tighten screws by wrist reciplocating movement.
Assuming a work with a terminal box and/or in a power distribution board, we have developed Ball Ratchet Screwdriver No.2200 with a 6mm slim shank covered by resin for prevention of short-circuit accidents.
The ratchet unit is designed safe usagne in mind, not exposing the metal part as a measure against short circuit accidents by any possibility. The rotation direction can be switchedto either clockwise or unclockwise, and it also can be fixed, which enables to use No.2200 as a standard screwdriver.
Apart from those in the above, a replacement blade is available for the case of tip abrasion. Users can replace the blades easily as the blade unit is separable from the ball grip unit.
・Popular Ball Grip Screwdriver ; smooth insert into and takeoff from a tool bag.
・36-gear ratchet incorporated; wrist wiggling movement enables easy fastening. Rapid tightening is also possible.
・Shaft covered by resin for prevention of short-circuit accidents.
・Fully hardened shank with magnetized tip; it is from the same material as VESSEL industial bits.
・Easy blade replacement at the time when the blade tip is worn out and/or broken.
・3 sizes are available: PH2x100/150, PH3x300. Repacement blades also available.