Air Nipper Round-Type without Lever
●Its round-shaped body makes it possible to finely adjust the installation angle.
●Ideal for cutting the sprue gate after mounted on the take-out arm or the holder on the chucking plate.
●The end part of the nipper body is 180-degree rotatable so that the position of the two air intake ports can be
changed depending on the mounting place.
| Model No. | A | B | E | F | Weight | Download |
EDP No. |
|
| drawing | ||||||||
| mm | mm | mm | mm | g | 2D | 3D | ||
| GT-NR3 | 110 | 23 | 17 | M3 Depth 8 |
70 | ▼ | ▼ | 360015 |
| GT-NR5 | 94 | 30 | 20 | M4 Depth 10 |
110 | ▼ | ▼ | 360016 |
| GT-NR7 | 113 | 34 | 22 | M4 Depth 10 |
150 | ▼ | ▼ | 360017 |
| GT-NR10L | 113 | 36 | 24 | M4 Depth 10 |
215 | ▼ | ▼ | 360018 |
| GT-NR20 | 129 | 45 | 30 | M5 Depth 12 |
280 | ▼ | ▼ | 360019 |
| GT-NR30 | 165 | 56 | 40 | M6 Depth 12 |
505 | ▼ | ▼ | 360020 |
| GT-NR50 | 222 | 75 | 50 |
M8 |
1190 | ▼ | ▼ | 360024 |
Hose coupling: R 1/4（Body Rc 1/8）
| Model No. | Capacity φmm | Air Consumption | Air Pressure | |||
| Plastics | Hard Plastics | Copper | Steel | cm3/str. | MPa | |
| GT-NR3 | 2 | 1 | 0.5 | 45 | 0.4～0.5 | |
| GT-NR5 | 2 | 1 | 0.5 | 64 | 0.4～0.5 | |
| GT-NR7 | 3 | 2 | 1.6 | 1 | 116 | 0.4～0.5 |
| GT-NR10L | 4 | 2.6 | 1.8 | 1.2 | 116 | 0.4～0.6 |
| GT-NR20 | 7 | 5 | 2.6 | 2 | 230 | 0.5～0.6 |
| GT-NR30 | 10 | 6.5 | 3.3 | 2.8 | 584 | 0.5～0.6 |
| GT-NR50 | 12 | 6.5 | 5.5 | 4.5 | 1170 | 0.5～0.6 |
・Air hose inner dia.: 5mm
※Before mounting of exclusive/automatic machines, check the following product dimensions.
（Frame O.D., screw dia., screw-to-screw dimensions, etc.)